Quick Reference Guide

Manage Security Profiles and Profile Groups
73
ProSAFE Wireless Controller WC9500
Configure Profiles in an Advanced Profile Group
For each profile group, the Edit Profile (Group-X) screen lets you create and configure up to
eight security profiles per wireless radio (eight profiles for a single-band access point;
16 profiles for a dual-band access point). Separate profiles are applied to
802.11b/bg/ng-mode and 802.11a/na-mode radios.
 To add a security profile to an advanced profile group and configure the security
profile:
1. Select Configuration > Profile > Advanced > Radio.
The Profile Groups screen displays.
2. Click Edit.
The Edit Profile (Group-X) screen displays.
3. Click the tab for the radio that for which you want to add a profile.
4. Click the + button to add the profile to the selected advanced profile group.
The Add Profiles pop-up screen displays:
5. (Optional) Clone an existing profile:
a. Select the Clone an existing Profile check box.
b. Select a profile from the Profiles menu.
6. Click Add.
The newly created profile displays onscreen, and the tab for the new profile is
automatically selected to let you configure the new profile.
Note: The selections that are available from the Network Authentication
menu are affected by the authentication server settings that you
specify on the Authentication Server screen. For more information,
see Manage Authentication Servers and Authentication Server
Groups on page 85. If your selection from the Network
Authentication menu requires authentication, a corresponding
Authentication Server field displays.