Quick Reference Guide

Manage Security Profiles and Profile Groups
72
ProSAFE Wireless Controller WC9500
The Profile Groups screen displays:
Click + to add another profile group.
2. To add a profile group, click the + button.
The new profile group displays on the Profile Groups screen. By default, an NG_11g-0
profile and an NG_11a-0 profile are present in a profile group.
Note: By default, profile groups are named Group-1, Group-2, Group-3,
and so on. You cannot change these profile group names.
The following table describes the fields that are shown for each profile in a profile group.
Setting Description
Name The unique profile name.
Radio The wireless radio mode in which the profile is operating.
Authentication The authentication setting under which the profile is operating.
 To remove an advanced profile group:
1. Select Configuration > Profile > Advanced > Radio.
The Profile Groups screen displays.
2. Click the tab for the profile group that you want to remove.
3. Click Delete.
Note: There is no separate procedure to edit profile groups. You edit profile
groups by adding, removing, or changing profiles in the profile group.