Quick Reference Guide

Manage Security Profiles and Profile Groups
71
ProSAFE Wireless Controller WC9500
5. Click Apply.
 To remove an existing profile:
1. Select Configuration > Profile > Basic > Radio.
The Edit Profile (Basic) screen displays.
2. Click the tab for the radio for which you want to remove a profile.
3. Click the tab for the profile that you want to remove.
4. Click Delete.
5. Confirm that you want to delete the profile.
Configure Security Profiles for Advanced Profile
Groups
Advanced profile groups are useful for larger deployments. NETGEAR recommends that you
read the information in the Wireless Security Profile Concepts on page 64 before you
configure any profile groups and profiles.
Advanced Profile Groups
The advanced Profile Group screen lets you create up to eight profile groups. For each
profile group, you can create and configure up to eight security profiles per wireless radio
(eight profiles for a single-band access point; 16 profiles for a dual-band access point).
Separate profiles are applied to 802.11b/bg/ng-mode and 802.1
1a/na-mode radios.
By default, all access points are assigned to the basic profile group. After you have created
advanced profile groups, you can use the WLAN Network screen to reassign access points to
any of these advanced profile groups (see Assign Access Points to Advanced Profile Groups
on page 104).
 To add an advanced profile group:
1. Select Configuration > Profile > Advanced > Radio.