Quick Reference Guide

Manage Security Profiles and Profile Groups
70
ProSAFE Wireless Controller WC9500
7. Click Apply.
Edit and Remove Profiles in the Basic Profile Group
You can easily change or remove a profile from the basic profile group.
 To edit an existing profile:
1. Select Configuration > Profile > Basic > Radio.
The Edit Profile (Basic) screen displays.
2. Click the tab for the radio for which you want to edit a profile.
3. Click the tab for the profile that you want to edit.
4. Change the settings.
For information about how to change the settings, see Configure Profiles in the Basic
Profile Group on page 67.
Note: Captive Portal
displays only when you
select Open System,
Shared Key, WPA-PSK,
WPA2-PSK, or
WPA-PSK & WPA2-PSK
from the Network
Authentication menu.
Captive Portal Select this check box if you want to enable the captive portal.
For more information, see Manage Guest Network Access on
page 111.
Note: You cannot configure captive portal authentication if the
network authentication uses a RADIUS server, whether it is a
local server or an external server. That is, if you configure a
RADIUS server with WPA, WPA2, or WPA & WPA2 (or if you
use legacy 802.1X), the Captive Portal check box is not shown
onscreen.
Note: Authentication
Server displays only
when you select WP
A
with Radius, WP
A2 with
Radius, or WPA & WPA2
with Radius from the
Network Authentication
menu.
Authentication
Server
Select one of the following radio buttons:
• Local. Use the local authentication server
.
• External
. Use an external authentication server.
Select an external authentication server from the
Authentication Server menu.
Note:
For information about setting up and enabling internal
and external authentication servers, see Manage
Authentication Servers and Authentication Server Groups on
page 85.
Wireless QoS section
Wi-Fi Multimedia (WMM) To enable Wi-Fi Multimedia (WMM), select the Enable radio button, which is
the default setting.
Select the Disable button to disable the feature. For more information, see
Configure QoS for Advanced Profile Groups on page 144.
WMM Powersave The WMM Powersave feature saves power for battery-powered equipment by
increasing the ef
ficiency and flexibility of data transmission.
T
o enable this feature, select the Enable radio button, which is the default
setting.
Select the Disable button to disable the feature.
Setting Description