Quick Reference Guide

Manage Security Profiles and Profile Groups
68
ProSAFE Wireless Controller WC9500
3. Click the + button to add the profile to the basic profile group.
The Add Profiles pop-up screen displays.
4. (Optional) Clone an existing profile:
a. Select the Clone an existing Profile check box.
The previous figure shows that you can clone an existing profile with the name
VLAN10.
b. Select a profile from the Profiles menu.
5. Click Add.
The newly created profile displays onscreen, and the tab for the new profile is
automatically selected to let you configure the new profile.
Note: The selections that are available from the Network Authentication
menu are affected by the authentication server settings that you
specify on the Authentication Server screen. For more information,
see Manage Authentication Servers and Authentication Server
Groups on page 85. If your selection from the Network
Authentication menu requires authentication, a corresponding
Authentication Server field displays.
6. Configure the settings as described in the following table:
Setting Description
Profile Definition section
Name Enter a unique name to identify the profile.
This value can be up to 32 alphanumeric characters. Use meaningful profile
names instead of the default names.
The default profile names are Profile1,
Profile2, and so on, through Profile8.
Wireless Network Name
(SSID)
Enter a unique name for the wireless network associated with this profile.