Quick Reference Guide

Configure the System and Network Settings and Register the Licenses

ProSAFE Wireless Controller WC9500

Configure Syslog Settings

This screen lets you configure the settings to connect to a syslog server, if you have one

configured in your network.

 To configure syslog settings:

1. Select Configuration > System > Alerts/Logs > Logs/Syslog.

The Logs Settings screen displays:

2. In the Syslog Settings section of the screen, configure the settings as described in the

following table:

Setting Description

Enable Syslog Enable the syslog settings, if you have a syslog server on your network.

Syslog Server IP Address Enter the IP address to which the wireless controller and managed access

points send all syslogs, if the Syslog check box is selected.

Server Port Number Enter the number of the port at which your syslog server is configured to listen to

requests.

3. Click Apply.