Quick Reference Guide

Configure the System and Network Settings and Register the Licenses
55
ProSAFE Wireless Controller WC9500
3. Configure the settings as described in the following table:
Setting Description
Update From Select one of the following radio buttons to specify the license update server:
• Default Update Server.
The default license update server is used.
• Specify Update Server. You need to specify the license update server
. Fill in
the Server Address field.
Server Address Enter the IP address or FQDN of the server from which you
import your licenses.
By default, the FQDN of the NETGEAR license server is
update1.eng.netgear
.com.
Use a Proxy Server to
Connect to the Internet
Select this check box if you use a proxy server to connect to the Internet.
Proxy Server Enter the IP address or FQDN of the proxy server.
Proxy Port Enter the port that the proxy server uses.
This Proxy Server
Requires Authentication
If the proxy server requires authentication, specify the user name and password.
User Name Enter the user name to access the proxy server
.
Password Enter the password to access the proxy server.
4. Click Apply.
Register Your Licenses with the License Server
You need to have purchased licenses before you can register them. For more information,
see Licenses on page 18)
 To register your licenses:
1. Make sure that the wireless controller is connected to the Internet.
2. Select Maintenance > License.
3. Click the Registration tab.