Quick Reference Guide

Configure the System and Network Settings and Register the Licenses

ProSAFE Wireless Controller WC9500

Manage the DHCP Server

Note: Make sure that a DHCP server is available; otherwise, the Discovery

Wizard does not function correctly. If you already have a DHCP

server on your network, do not enable the DHCP server on the

wireless controller.

The wireless controller can function as a DHCP server. You can add multiple DHCP server

pools for different VLANs. By default, there is no DHCP server pool. The DHCP Server List

screen lets you add a DHCP server pool.

 To add a DHCP server and configure its settings:

1. Select Configuration > System > DHCP Server.

The DHCP Server List screen displays. The following figure shows part of the DHCP

Server List screen. Because this is a wide screen, it is shown in the following two figures:

The DHCP Server List shows the DHCP servers that are already configured on the

wireless controller.