Quick Reference Guide

Configure the System and Network Settings and Register the Licenses
50
ProSAFE Wireless Controller WC9500
The IP Settings screen displays:
2. Configure the settings as described in the following table:
Setting Description
IP Settings section
IP Address Enter the IP address of the wireless controller.
The default IP address is 192.168.0.250. To change it, enter an available IP
address from the address range used on your LAN.
IP Subnet Mask Enter the subnet mask value used on your LAN.
The default value is 255.255.255.0.
Default Gateway Enter the IP address of the gateway for your LAN.
Primary DNS Server Enter the IP address of the primary Domain Name Server (DNS) that you want to
use.
Secondary DNS Server Enter the IP address of the secondary DNS that you want to use.
WINS Server Enter the IP address of the Windows Internet Name Service (WINS) that you want
to use.
Management VLAN Settings section
Management VLAN Enter the management VLAN.
For information, see Management VLAN Concepts on page 49.
Untagged VLAN Select this check box if the configured VLAN is untagged.
For information, see Untagged VLAN Concepts on page 49.
3. Click Apply.