Quick Reference Guide

Installation and Configuration Overview

ProSAFE Wireless Controller WC9500

Web Management Interface Layout

The following figure shows the menus at the top and the left of the wireless controller’s web

management interface (the screen’s content has been removed for more clarity).

1st level: Main menu tab

2nd level: Configuration menu tab

3rd level: Submenu link

Action buttons

Figure 12. Web management interface components

A web management interface screen can include the following components:

• 1st level: Main menu tab. The main menu tabs in the light gray bar across the top of the

web management interface provide access to all configuration menu tabs of the wireless

controller and remain constant. When you select a main menu tab, the letters are

displayed in white against a blue background.

• 2nd level: Configuration menu tab.

The configuration menu tabs in the blue bar

(immediately below the main menu bar) change according to the main menu tab that you

select. When you select a configuration menu tab, the letters are displayed in orange

against a blue background.

• 3rd level: Submenu link. Each configuration menu tab has one or more submenu links

that are listed on the left side of the screen in a gray box. When you select a submenu

link, the text is displayed in orange against a gray background. On many screens, the

submenus are divided into a Basic submenu and an

Advanced submenu.

• Action buttons. Action buttons let you change the configuration or navigate through the

web management interface. These are the most common action buttons:

- Apply. Saves all configuration changes made on the current screen. Saved settings

are retained when the wireless controller is powered off or rebooted, while unsaved

configuration changes are lost.

- Cancel. Resets options on the current screen to the last-applied or -saved settings.

- Add

Adds an item to the screen. Typically, a pop-up screen opens that enables you

to enter information in additional fields.

- Edit. Allows you to edit the configuration of the selected item.