Quick Reference Guide

System Planning and Deployment Scenarios
37
ProSAFE Wireless Controller WC9500
5. When the access points are operating, open the Discovery
Wizard to do the following:
Access Point > Discovery Wizard
1. Specify the state of the access points by selecting the Out of
Factory and L2 Subnet APs radio button.
2. Run the Discovery Wizard.
3. Select and add the access points that you want to be managed
by the wireless controller to the managed list.
Note: By default, all access points are added to the basic group.
6. Assign the access points to the access point profile groups (also
referred to as WLAN groups) Building 1 and Building 2.
Configuration > WLAN Network
Step Configuration Web management interface path