Quick Reference Guide

System Planning and Deployment Scenarios

ProSAFE Wireless Controller WC9500

Scenario Example 2: Advanced Network with VLANs and

SSIDs

The following sample scenario consists of an advanced network with a wireless controller,

PoE switch, Layer 3 switch or router, access points, and several VLANs and SSIDs. These

are the VLANs in the wireless controller system:

• VLAN 1, the default untagged VLAN to access the wireless controller

• VLAN 10, a tagged client VLAN

• VLAN 20, another tagged client VLAN

• VLAN 100, a tagged management VLAN

5. When the access points are operating, open the Discovery

Wizard to do the following:

Access Point > Discovery Wizard

1. Specify the state of the access points by selecting the Out of

Factory and L2 Subnet APs radio button or the Installed

and working in Standalone Mode radio button.

2. Run the Discovery Wizard.

3. Select and add the access points that you want to be managed

by the wireless controller to the managed list.

Note: By default, all access points are added to the basic group

and all settings from the basic group (profile definition, client

authentication, authentication settings, and wireless QoS) are

applied to the access points.

Step Configuration Web Management Interface Path