Quick Reference Guide

Monitor the Wireless Network and Its Components
190
ProSAFE Wireless Controller WC9500
The following table describes the fields of the Active SSID table with access points:
Item Description
Select The radio button that lets you select the access point.
Location The location of the access point (see Edit Access Point Information on the
Managed AP List on page 101).
Name The name of the access point (see Edit Access Point Information on the
Managed AP List on page 101).
Status The status of the access point (healthy or down).
MAC The MAC address of the access point.
IP The IP address of the access point.
Model The model of the access point (WNAP210, WNAP320, WNDAP350,
WNDAP360, or WNDAP380R).
Building The building designation is always Building-1.
Floor The floor designation is always Floor-1.
2.4 GHz Channel The configured 2.4 GHz channel on the access point. This information can
change after initial configuration of the access point because of automatic
channel allocation.
5 GHz Channel The configured 5 GHz channel on the access point. This information can change
after initial configuration of the access point because of automatic channel
allocation.
Uptime The period since the access point was last restarted.
3. (Optional) To see details about an access point:
a. Select the radio button that corresponds to the access point for which you want to see
the details.
b. Click Details.