Quick Reference Guide

Monitor the Wireless Network and Its Components
182
ProSAFE Wireless Controller WC9500
The following table describes the fields of the Clients table:
Item Description
Select The radio button that lets you select the client.
MAC The MAC address of the wireless client.
IP The IP address of the wireless client.
Note the following:
• If clients and the access point to which they are connected are in the same
VLAN, all receive an IP address from the same DHCP server
.
• If clients and the access point to which they are connected are not in the
same VLAN, you need to have a DHCP server for the client VLAN.
•
If clients are not connected to any DHCP server, IP addresses in the
169.254.x.x. range are assigned automatically
.
Location The location of the access point (see Edit
Access Point Information on the
Managed AP List on page 101) to which the wireless client is connected.
AP-Name The name of the access point (see Edit Access Point Information on the
Managed AP List on page 101) to which the wireless client is connected.
AP-IP The IP address of the access point to which the wireless client is connected.
AP-MAC The MAC address of the access point to which the wireless client is connected.
Client Type The wireless mode that the wireless client is using to connect to the access point
(802.1
1ng, 802.11 bg, 802.1
1 b, 802.11na, or 802.11 a).
Usage (KBytes) The traffic usage of the wireless client in KB.
RSSI The received signal strength indicator (RSSI) of the wireless client.
Building The building designation is always Building-1.
Floor The floor designation is always Floor-1.
SSID The wireless network SSID that the wireless client is using to connect to the
access point.
Security The security mode (Open, WEP, WPA, WPA2, or WPA/WPA2) that the wireless
client is using to connect to the access point.
4. (Optional) To see details about a client:
a. Select the radio button that corresponds to the clients for which you want to see the
details.
b. Click Details.