Quick Reference Guide

Monitor the Wireless Network and Its Components
180
ProSAFE Wireless Controller WC9500
3. Click OK.
The AP Details screen closes, and the Access Point screen displays again.
View Clients Managed by the Wireless Controller
The Clients screen lets you view all clients that are connected to access points that are
managed by the wireless controller.
 To view the Clients screen:
Select Monitor > Controller > Clients.
SSID The wireless network SSID that the wireless client is using to connect to the
access point.
Security The security mode that the wireless client is using to connect to the access
point (Open, WEP, WP
A, WPA2, or WPA/WPA2).
Rogue AP Info
For all rogue and unmanaged neighboring access points combined that are detected by the selected
managed access point, the following information displays:
Type The type of profile that the rogue access point is using to connect to the
access point (802.1
1b/bg/ng or 802.1
1a/na).
Reported The total number of detected rogue access points in the wireless mode.
In Same Channel The total number of detected rogue access points in the same channel.
In Interfering Channel The total number of detected rogue access points in the interfering channel.
Statistics
For each type of usage (Wired Ethernet, Wireless ng, bg, or b and Wireless na or a), statistics about
transmitted and received packets and bytes display for the selected access point.
The actual statistics
are self-explanatory
.
Note: To see all fields of the table on the AP Details screen, scroll to the right.
Item Description