Quick Reference Guide

Introduction
16
ProSAFE Wireless Controller WC9500
- Concurrent operation in 2.4 GHz and 5 GHz radio band while in 802.11n mode.
- Accepts optional antennas.
- Requires minimum firmware version 2.1.7 or a newer version.
For product documentation and firmware, see
http://support.netgear.com/product/WNDAP350.
• WNDAP360 ProSAFE Dual Band W
ireless-N
Access Point
- Supports 802.11a, 802.1
1b, 802.11g, and 802.11n network devices.
- Supports PoE with a power consumption of up to 10.51W.
- Concurrent operation in 2.4 GHz and 5 GHz radio band while in 802.11n mode.
- Accepts optional antennas.
- Requires minimum firmware version 2.1.6 or a newer version.
For product documentation and firmware, see
http://support.netgear
.com/product/WNDAP360.
• WNDAP380R ProSAFE Dual Band W
ireless-N
Access Point with RFID support
- Supports 802.11a, 802.1
1b, 802.11g, and 802.11n network devices.
- Supports PoE with a power consumption of up to 10.51W.
- Concurrent operation in 2.4 GHz and 5 GHz radio band while in 802.11n mode.
- Can integrate an RFID module for support of RFID devices and tags.
- All WNDAP380R firmware versions are supported.
For product documentation and firmware, see
http://support.netgear
.com/product/WNDAP380R.
What Can You Do with the WC9500 Wireless
Controller?
These are some of the tasks that you can perform with a WC9500 wireless controller:
• Organize the Network
- Create access point profiles. Organize access points in profiles to dif
ferentiate
between SSIDs, client authentication, authentication settings, and wireless QoS
settings.
- Create access point profile
groups. Organize access point profiles in access point
profile groups to differentiate between buildings, floors, businesses, business
divisions, and so on. Easily assign access points to profile groups or change
assignments.
For more information, see
Chapter 5, Manage Security Profiles and Profile Groups.