Quick Reference Guide

Configure Wireless and QoS Settings
150
ProSAFE Wireless Controller WC9500
Rate Limiting for an Advanced Profile Group
For each profile group, and for each radio mode (802.11b/bg/ng mode and 802.11a/na
mode), rate limiting per profile adds up to a maximum of 100 percent. (It can be less than
100 percent.) There is a tab for each group and for each wireless radio mode.
 To configure rate limiting for an advanced profile group:
1. Select Configuration > Profile > Advanced > Rate Limit.
The advanced Rate Limit screen displays:
2. Click the tab for the profile group for which you want to configure rate limiting.
3. Click the tab for the radio for which you want to configure rate limiting.
4. For each profile on a wireless radio in the selected profile group, specify the rate limit as a
percentage.
You can drag the sliders to adjust the values in the rate limit fields to the right of the
sliders. Make sure that the total percentages of all profiles on one wireless radio in the
selected profile group do not exceed 100 percent.
5. Click Apply.