Quick Reference Guide

Configure Wireless and QoS Settings
143
ProSAFE Wireless Controller WC9500
The advanced RF Management screen displays:
2. Click the tab for the profile group for which you want to configure RF management.
3. Configure the settings as described in the following table.
Setting Description
TX Power Settings
Default Tx Power Make a selection from the menu to specify how the transmission (Tx)
power is configured on the access points: Full, Half, Quarter, Eighth,
or Minimum.
When automatic Tx power control is enabled, the selection from the
menu is used as the initial power level for the access points.
Automatic Tx Power Control Select the enable radio button to enable automatic
Tx power control:
• When a client attempts to connect to an access point at low power
,
the access point’s Tx power is automatically increased above the
default level.
•
When there are overlapping coverage areas, the access point’s Tx
power is automatically decreased below default level.
Select the disable radio button to disable automatic
Tx power control.
WLAN Healing
Maximum Neighbors to Participate
in Self-healing
From the menu, select the maximum number of neighboring access
points that increase or decrease power to cover for a failing access
point.
Selecting 0 (zero) disables this feature. Use close neighbors, not a
distant access point, and do not use all access points.