Manualshelf

Quick Reference Guide

ManualsBrandsNetgear ManualsWirelessNetgear WC9500
131132133134135136137138139140
Configure Wireless and QoS Settings
136
ProSAFE Wireless Controller WC9500
For you to be able to configure these settings in the table, there are two requirements:
• Channel. To enable the
Access Point Channel menu in the table, you need to disable
automatic channel allocation on the Channel Allocation screen (see Configure Channels
on page 137).
• Transmission power. T
o enable the Tx Power menu in the table, you need to disable
automatic Tx power control on the advanced RF Management screen (see RF
Management for an Advanced Profile Group on page 142).
To override the channel and transmission power for individual access points in a
security profile of an advanced profile group:
1. Select Configuration > Wireless > Advanced > Wireless.
The Advanced Wireless Settings screen displays.
2. Click the tab for the profile group for which you want to configure the wireless settings.
3. Click the tab for the radio for which you want to configure the wireless settings.