Manualshelf

Quick Reference Guide

ManualsBrandsNetgear ManualsWirelessNetgear WC9500
131132133134135136137138139140
Configure Wireless and QoS Settings
133
ProSAFE Wireless Controller WC9500
4. Click Apply.
Configure Wireless Settings for an Advanced Profile Group
There are two requirements for you to be able to configure the wireless settings on the
Advanced Wireless Settings screen:
• You need to disable automatic channel allocation for the radio on the Channel Allocation
screen. For information about channel allocation, see Configure Channels on page 137.
• There needs to be at least one access point assigned to the profile group for the radio for
which you want to configure the wireless settings.
To configure wireless settings for an advanced profile group:
1. Select Configuration > Wireless > Advanced > W
ireless.
The Advanced Wireless Settings screen displays:
Tx Power From the menu, select the transmission power of the access point.
Note: By default, the access point’s transmission power is set to the
configuration that is selected on the basic RF Management screen. For more
information, see RF Management for the Basic Profile Group on page 141.
Setting Description