Quick Reference Guide

Manage Rogue Access Points, Guest Network Access, and Users
110
ProSAFE Wireless Controller WC9500
The advanced Rogue AP screen displays:
The screen displays the Rogue List, which shows all detected rogue access points with
essential information, including information about their last beacon. If there are many
entries that are spread out over several pages, click Next or Previous to scroll through
the Rogue List.
Note: As an option, you can import a list of access points from a file. For more
information,
see the next section.
2. Classify the access points in the Rogue List:
a. Do one of the following:
• Select one or more check boxes that correspond to the access points.
• Select all access points in the Rogue List by selecting the check box at the top of
the table.
b. Click one of the following two buttons, both of which are located below the Rogue
List:
• Known. Moves the selected access points to the known list.
• Unknown. Moves the selected access points to the unknown list.
3. (Optional) For each known access point, enter a name in the Name column.
This allows access points to be more easily identified.
4. Click Apply.
Import a List of Known Access Points from a File
You can import a list of known access points from a saved file. To do this, create a text file
that includes the MAC address of each access point. This file needs to be a simple text file
with one MAC address per line. The wireless controller can support a total of up to
512 access points from the known and unknown lists combined.