User Manual

RF Planning and Deployment
61
Wireless Controller
• To specify the floor length, click the Length(Y) button, select Meter or Feet from
the menu, and enter the floor length.
Note: If you do not want to enter the length or width or the information is not
available, you can scale the floor later (see Scale a Floor on page 61).
d. Click the Confirm button.
The floor map is uploaded and displays onscreen.
8. Click the Save
icon.
Your settings are saved.
Scale a Floor
If you did not specify the floor width or floor length while adding a new floor (see Add a
Building and Floors on page 58 or Add a Single Floor to a Building on page 60), you can do
so by scaling the floor. You must know the distance in meters or feet between two known
points on the floor.
 To scale a floor:
1. Open a web browser, and in the browser’
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Plans > Planning.
The page displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor
.
The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the
Scale
icon.
8. Select a line between two points on the map by anchoring the line at one point and releasing
the line at the other point.
The points do not need to cover the entire length or width of the floor.
The Scale Map pop-up window opens.
9. Select Meter or Feet from the menu and enter the distance between the two points.