User Manual

Table Of Contents
Manage Stacking and Redundancy
315
Wireless Controller
To remove a redundancy group:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Stacking.
5. Clear the Enable Redundancy check box.
6. Click the Apply button.
Your settings are saved. Each controller in the redundancy group reboots. Redundancy is
no longer provided.
Upgrade Firmware in a Stacked Redundancy Group
If you configure wireless controllers in a stack and in a redundancy group, upgrade firmware
in the following order:
1. Upgrade the redundant (secondary) controllers in the redundancy group.
2. Upgrade the slave controllers in the stack.
3. Upgrade the master controller in the stack.