User Manual

Configure WiFi, Radio Frequency, and QoS Settings
221
Wireless Controller
 To configure client rate limiting for the basic profile group:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Profile > Basic > Rate Limit.
In the Client Rate Limit section, the page provides a tab for each WiFi radio.
5. In the Client Rate Limit section, click the tab for the radio for which you want to configure
client rate limiting.
6. For each profile on a WiFi radio, select a value in Mbps from the Rate Limit menu.
You can select a value from 0 Mbps (which disables client rate limiting) and 50 Mbps (the
maximum value).
7. Click the Apply button.
Your settings are saved.