User Manual

Configure WiFi, Radio Frequency, and QoS Settings
206
Wireless Controller
IMPORTANT:
Changing channels might temporarily affect traffic on the managed
access points in the network.
7. To run channel allocation immediately, click the Run Now button. Access
points for which
you configured channel override are not
A pop-up window shows the list of allocated channels. The selected channels are applied
to the managed access points.
This option is useful when you add a new access point or change your network.
8. Click the Apply button.
Your settings are saved. If enabled, the channel allocation occurs according to the
configured schedule.
Override the Channel and Frequency for an Access Point
Whether or not you enable automatic channel allocation, an access point’s channel and
frequency are automatically set. You can override the channel and frequency and select
another combination. However, do so only if a specific need exists. Changing a channel and
frequency might temporarily affect the traffic on the access point.
 To override the channel and frequency for individual access points:
1. Open a web browser, and in the browser
’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > RF Management > Channel
Allocation > Channel Override.