User Manual

Table Of Contents
Configure WiFi, Radio Frequency, and QoS Settings
196
Wireless Controller
Override Transmission Power for Individual Access Points in
the Basic Profile Group
You can override the automatic transmission power settings for individual access points in
the basic profile group.
For information about the automatic transmission power for access points in the basic profile
group, see Configure Automatic Transmission Power for the Basic Profile Group on
page 193.
To override transmission power for individual access points in the basic profile group:
1. Open a web browser, and in the browser
s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > RF Management > Basic > Tx Power Override.
5. For each access point for which you want to override the transmission power, do the
following:
T
o override the power for the 2.4 GHz radio, select a power level from the 2.4 Ghz Tx
Power menu and select the associated
2.4 Ghz Override check box.
To override the power for the 5 GHz radio, select a power level from the 5 Ghz Tx
Power menu and select the associated
5 Ghz Override check box.
You can override the power for both radios on the same access point and you can
override the settings for more than one access point.
6. Click the Apply button.
Your settings are saved.