Configuring VLAN with Wireless Controller internal DHCP server

Page 9
Router
Step 1 – Add static route to new Wireless LAN
The router needs to know about this new IP subnet, so we will need to add a static route. This is done by selecting Network
Confi guration – Routing on a NETGEAR fi rewall.
NOTES
This guide is based on a factory default WC7520, running fi rmware 2.5.0.5_3215.
SECURITY
Security is outside of the scope of this document. ACLs can be implemented on the switch to limit tra c.
NETGEAR, the NETGEAR logo, ProSAFE and ProSECURE are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United
States and/or other countries. Information is subject to change without notice. ©2013 NETGEAR, Inc. All rights reserved.