Configuring VLAN with Wireless Controller internal DHCP server

Page 6

Step 3 - Conﬁ gure the DHCP scope

Select Conﬁ guration – System – DHCP Server. Select Add to add a DHCP server for your Wireless LAN. Again, the default

gateway will be the switch on 192.168.250.2 and the DNS server will be the router on 192.168.100.1. The range will

exclude the static addresses, in this case we will use 192.168.250.100-192.168.250.200.

Step 4 - Plug in your Access Point to port 4

Make sure the Access Point is on Factory Defaults, and wait until it’s fully booted up.