Installation Guide

6
6. To set up the wireless controller name and select the country in which
the wireless controller is used, select Configuration > System >
General.
7. To choose the time zone and optionally configure NTP settings, select
Configuration > System > Time.
8. To configure the wireless controller IP settings, select Configuration
> System > IP/VLAN.
When you click the Apply button to save your settings, your
connection to the wireless controller is terminated because you
changed its IP address.
9. Reconfigure your computer with an IP address and subnet mask that
are in the same IP subnet as the wireless controller. Use the new IP
address of the wireless controller to log in again.