Installation Guide

4
Wireless Controller LEDs
LED Description
ID The number of connected access points.
Power • Green. Power is supplied.
• O. The switch is not receiving power.
If the Power LED is o, check the connections and see if the
power outlet is controlled by a wall switch that is turned o.
Status • Green. Normal operation.
• Yellow. Booting.
• Blinking yellow. Firmware update in progress.
Fan • Green. All fans are operating normally.
• Yellow. One or more fans failed.
• O. No fan is detected.
Stack Master • Green. The controller is acting as master in a stack.
• O. The controller is operating as standalone or a slave in a
stack (WC7600 only feature).
Ethernet port
(le and right)
• Green (le). The port is linked in gigabit mode (WC7600).
• Blinking green (le). Activity is detected.
• O (le). The port is not linked in gigabit mode (WC7600).
• Yellow (right). The port is linked in 10/100 megabit mode.
• Blinking yellow (right). Activity is detected.
• O (right). The port is not linked in 10/100 megabit mode.