User Manual
Table Of Contents
- Contents
- 1. Access the AirBridge and Use the Easy Setup Method
- Related documentation
- Overview
- About NETGEAR Insight
- AirBridge label
- Operation mode: AirBridge Master, AirBridge Satellite, Access Point, or Client Bridge
- AirBridge mode
- Access the AirBridge for initial configuration
- Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device
- Connect over the Internet using the NETGEAR Insight Cloud portal
- Connect over WiFi using a WiFi-enabled computer or mobile device
- Connect over Ethernet using a computer connected to the same network
- Connect over Ethernet using a directly connected computer
- Operation mode and default settings after the Day Zero Easy Setup configuration
- Log in to the AirBridge after initial setup
- Change the language of the local browser UI
- 2. Manually Configure or Change the Operation Mode
- 3. Manage the Wired Network Settings
- 4. Manage the WiFi and Radio Features
- Recommended configuration order
- Change the device name of the AirBridge
- Change the country and region of operation
- Change the AirBridge mode
- Scan for neighboring access points
- Specify the approximate distance for the WiFi connection
- Manage the 5 GHz SSIDs and WiFi security
- Change the 5 GHz SSID or WiFi security mode for a satellite
- Change or configure a new 5 GHz SSID for a master with the AirBridge mode enabled
- Change or configure a new 5 GHz SSID for a master with the AirBridge mode disabled
- Change the 5 GHz SSID or WiFi security mode for a client bridge
- Change or configure a 5 GHz SSID for an access point
- Configure a guest network on an access point
- Set up WPA2-Enterprise security on a master or access point
- Set up WPA2-Enterprise security on a satellite or client bridge
- Manage the settings for the 2.4 GHz management SSID
- 5. Manage Advanced WiFi and Radio Features
- Recommended configuration order
- Manage the channel high throughput mode
- Manage the channel or channels
- Manage the radio transmit power
- Change the bit rate
- Manage client limits
- Manage time slot assignments to satellites
- Manage the satellite priority
- Set up a WiFi on/off schedule for a 5 GHz SSID
- Set up a MAC filter for a 5 GHz SSID
- Set up a RADIUS accounting server on a master or access point
- Manually block a WiFi client or connection from a 5 GHz SSID
- Configure traffic shaping for a 5 GHz SSID
- Change the DHCP server settings for a guest WiFi network
- 6. Maintain the AirBridge
- Change the management mode to NETGEAR Insight Mode or Standalone Mode
- Upgrade the firmware on the AirBridge
- Reboot the AirBridge from the local browser UI
- Schedule the AirBridge to reboot
- Manage the configuration file of the AirBridge
- Reset the AirBridge to factory default settings
- Manage the date and time settings
- Configure and view the logs
- Set up email alerts
- Manage access security settings
- Specify a management VLAN
- 7. Monitor the AirBridge and its Network Connections
- 8. Perform Diagnostics and Troubleshooting
- Send a ping
- Send a traceroute request
- Send a name server lookup request
- Perform a speed test
- Quick tips for troubleshooting
- Troubleshoot with the LEDs
- Troubleshoot the WiFi connectivity
- You cannot log in to the AirBridge over a LAN connection
- Changes are not saved
- Troubleshoot your network using your computer ping utility
- A. Factory Default Settings and Technical Specifications
(Continued)
DescriptionSetting
To prevent WiFi and LAN clients on the same AirBridge from communicating with each
other, select the Enable radio button. If you enable L2 isolation, clients can still communicate
with each other over the Internet.
By default, the Disable radio button is selected.
If you enable L2 isolation, to exclude a device from L2 isolation, enter the MAC address of
the device in a Whitelist field.
L2 Isolation
Wireless Security
From the Security Mode menu, select WPA2-PSK or WPA2-Enterprise for the connection
to the selected SSID.
For information about WPA2-Enterprise, see Set up WPA2-Enterprise security on a master
or access point on page 81.
Note: We recommend that you set up security, although in certain situations, and if you
are aware of the risks, you can select None.
Security Mode
If you select WPA2-PSK from the Security Mode menu, this field is fixed at AES. You cannot
select another option.
Encryption
If you select WPA2-PSK from the Security Mode menu, enter a passphrase (network key
or WiFi password). The length of the passphrase must be from 8 to 63 characters.
You must enter the same passphrase on a client bridge that must connect to the access
point. WiFi clients must enter the same passphrase enter to connect to the SSID.
Passphrase
The period in seconds that the group key changes. The period can be from 30 to 3600
seconds. The default period is 3600 seconds (1 hour).
If you enter 0, the update interval is disabled and the group key is not changed. For greater
security, we recommend that you do not disable the update interval so that the group key
can be changed automatically.
Group Key
Update Interval
Fast Roaming
To enable fast roaming, select the Enable radio button. By default, the Disable radio button
is selected.
If your network includes WiFi clients that must be able to roam from one AirBridge to
another AirBridge or access point, enable fast roaming so that certain client applications
can quickly reassociate with a new AirBridge or access point.
Fast roaming is not available if you select None from the Security Mode menu.
Status
For information about other WiFi features such as setting up a RADIUS accounting
server, a MAC filter, and traffic shaping, see Manage Advanced WiFi and Radio
Features on page 90.
User Manual79Manage the WiFi and Radio
Features
Insight Instant AirBridge WBC502 User Manual