User Manual
Table Of Contents
- Contents
- 1. Access the AirBridge and Use the Easy Setup Method
- Related documentation
- Overview
- About NETGEAR Insight
- AirBridge label
- Operation mode: AirBridge Master, AirBridge Satellite, Access Point, or Client Bridge
- AirBridge mode
- Access the AirBridge for initial configuration
- Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device
- Connect over the Internet using the NETGEAR Insight Cloud portal
- Connect over WiFi using a WiFi-enabled computer or mobile device
- Connect over Ethernet using a computer connected to the same network
- Connect over Ethernet using a directly connected computer
- Operation mode and default settings after the Day Zero Easy Setup configuration
- Log in to the AirBridge after initial setup
- Change the language of the local browser UI
- 2. Manually Configure or Change the Operation Mode
- 3. Manage the Wired Network Settings
- 4. Manage the WiFi and Radio Features
- Recommended configuration order
- Change the device name of the AirBridge
- Change the country and region of operation
- Change the AirBridge mode
- Scan for neighboring access points
- Specify the approximate distance for the WiFi connection
- Manage the 5 GHz SSIDs and WiFi security
- Change the 5 GHz SSID or WiFi security mode for a satellite
- Change or configure a new 5 GHz SSID for a master with the AirBridge mode enabled
- Change or configure a new 5 GHz SSID for a master with the AirBridge mode disabled
- Change the 5 GHz SSID or WiFi security mode for a client bridge
- Change or configure a 5 GHz SSID for an access point
- Configure a guest network on an access point
- Set up WPA2-Enterprise security on a master or access point
- Set up WPA2-Enterprise security on a satellite or client bridge
- Manage the settings for the 2.4 GHz management SSID
- 5. Manage Advanced WiFi and Radio Features
- Recommended configuration order
- Manage the channel high throughput mode
- Manage the channel or channels
- Manage the radio transmit power
- Change the bit rate
- Manage client limits
- Manage time slot assignments to satellites
- Manage the satellite priority
- Set up a WiFi on/off schedule for a 5 GHz SSID
- Set up a MAC filter for a 5 GHz SSID
- Set up a RADIUS accounting server on a master or access point
- Manually block a WiFi client or connection from a 5 GHz SSID
- Configure traffic shaping for a 5 GHz SSID
- Change the DHCP server settings for a guest WiFi network
- 6. Maintain the AirBridge
- Change the management mode to NETGEAR Insight Mode or Standalone Mode
- Upgrade the firmware on the AirBridge
- Reboot the AirBridge from the local browser UI
- Schedule the AirBridge to reboot
- Manage the configuration file of the AirBridge
- Reset the AirBridge to factory default settings
- Manage the date and time settings
- Configure and view the logs
- Set up email alerts
- Manage access security settings
- Specify a management VLAN
- 7. Monitor the AirBridge and its Network Connections
- 8. Perform Diagnostics and Troubleshooting
- Send a ping
- Send a traceroute request
- Send a name server lookup request
- Perform a speed test
- Quick tips for troubleshooting
- Troubleshoot with the LEDs
- Troubleshoot the WiFi connectivity
- You cannot log in to the AirBridge over a LAN connection
- Changes are not saved
- Troubleshoot your network using your computer ping utility
- A. Factory Default Settings and Technical Specifications
The AirBridge mode determines the following characteristics on the AirBridge:
AirBridge mode enabled:
•
Highly reliable connections for a limited number of WiFi devices. Provides
reliable point-to-point connections between a master and a satellite and
point-to-multipoint connections between a master and a limited number of satellites.
•
Best suited for long distance for a limited number of WiFi devices. A master can
connect over a long distance of 1.8 miles (3 km) or more to a satellite at a detached
site.
•
Single 5 GHz SSID. A single 5 GHz SSID provides the backhaul WiFi connection
between the master and the satellites.
•
No individual WiFi clients supported. Other than the satellites, individual WiFi
clients cannot connect to the 5 GHz SSID. However, by connecting a switch and a
WiFi access point to the satellite, you can support multiple WiFi clients at the detached
site.
•
Another AirBridge as a link partner only. An AirBridge and one or more other
AirBridges can establish WiFi connections. You cannot use any other types of access
points as link partners.
AirBridge mode disabled:
•
Reliable connections for multiple WiFi devices. Provides reliable
point-to-multipoint connections between an access point and multiple individual
WiFi clients.
•
Best suited for extended range for multiple WiFi devices. The powerful antenna
of the AirBridge supports a WiFi range that extends beyond the range of most access
points.
•
Multiple 5 GHz SSIDs. Multiple 5 GHz SSIDs can support satellites, client bridges,
and individual WiFi clients.
•
Individual WiFi clients supported. Individual WiFi clients can connect to the
AirBridge.
•
Any access point as a link partner. Any access point, including third-party access
points, can establish a WiFi connection with an AirBridge.
Note: For information about configuring the AirBridge mode, see Manually Configure
or Change the Operation Mode on page 37, and Change the AirBridge mode on page
59.
User Manual13Access the AirBridge and Use
the Easy Setup Method
Insight Instant AirBridge WBC502 User Manual