User Manual

which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
app on an iOS or Android mobile device on page 15).
The Device Status page displays the Device Information section and other sections.
4. Under System Manager, select Log.
The System Log page displays.
5.
To manage the log capability, select one of the following Status radio buttons:
•
Enable. The AirBridge log messages.
This is the default settings.
•
Disable. The AirBridge does not log messages.
6. From the Log type menu, select the event severity that the AirBridge logs:
•
ALL. All events are logged. This is the default setting. A large number of events
might be logged.
•
Debug. Events that provide very detailed device information, down to the
debugging level, are logged.
•
Information. Events that provide device information are logged.
•
Notice. Normal but significant device events are logged.
•
Warning. The lowest level of device warnings are logged.
•
Error. Device errors are logged. An example is a failure to request a device token.
•
Critical. The third-highest device warning level. An critical event is logged if a
critical device malfunction occurs.
•
Alert. The second-highest warning level. An alert event is logged if a serious
device malfunction occurs, such as all device features being down. Action must
be taken immediately.
•
Emergency. The highest warning level. If the device is down, or not functioning
properly, an emergency event is logged.
Note: Events with the selected severity level and all events of greater severity are
logged. For example, if you select Error, the logged events include Error, Critical,
Alert, and Emergency.
7. Click the Apply button.
Your settings are saved and applied.
8.
To refresh the information on the page, click the Refresh button.
The page refreshes and displays the most recent log messages.
User Manual123Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual