User Manual

If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
app on an iOS or Android mobile device on page 15).
The Device Status page displays the Device Information section and other sections.
4. Under Management, select Time Zone.
The page that displays shows the Date and Time Settings section and the Time Zone
section.
5.
To configure the date and time, in the Date and Time Settings section, select one of
the following radio buttons:
•
Manually Set Date and Time. Specify the date and time settings by doing one
of the following:
-
Enter the setting manually by doing the following:
a.
In the Date fields, specify the year, month, and date.
b.
In the Time fields, specify the hour and minutes.
Use 24-hour format.
-
Synchronize the date and time setting with the computer from which you log
in to the local browser UI of the AirBridge by clicking the Synchronize with
PC button.
•
Automatically Get Date and Time. The AirBridge automatically gets the date
and time from the Network Time Protocol (NTP) server that is specified in the
NTP Server field.
This is the default setting. You can specify a different NTP server from the one
that is preconfigured.
6.
To configure a different time zone from the one that you specified on the Day One
Easy Setup page, in the Time Zone section, do one of the following:
•
Select the Auto Detect check box.
The AirBridge detects the time zone automatically.
•
Clear the Auto Detect check box and select a time zone from the Time Zone
menu.
If you manually select a time zone, you can also manually configure daylight
saving time settings (see the next step).
User Manual121Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual