User's Manual

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
Basic Installation and Configuration 3-27
202-10078-01
2.
From the Security menu, click Radius Server Settings link to display the Radius Server
Settings menu shown below.
Figure 3-13: Radius Server Settings menu
3.
Authentication/Access Control Radius Server Configuration: This configuration is
required for authentication using Radius. IP Address, Port No. and Shared Secret is required
for communication with Radius Server. A Secondary Radius Server can be configured which
is used on failure on Primary Radius Server.
• IP Address: The IP address of the Radius Server. The default is 0.0.0.0
• Port Number: Port number of the Radius Server. The default is 1812.
• Shared Secret: This is shared between the Wireless Access Point and the Radius Server
while authenticating the supplicant.
4. Accounting Radius Server Configuration: This configuration is required for accounting
using Radius Server. IP Address, Port No. and Shared Secret is required for communication
with Radius Server. A Secondary Radius Server can be configured which is used on failure on
Primary Radius Server.