User Manual

If you are using adjacent access points, use different radio frequency channels to reduce
interference.
Set up and connect the access point to your
network
The access point is intended to function as a WiFi access point point in your existing
network.
The following sections describe how you can connect the access point to your network:
•
Set up the access point with a PoE network connection on page 22
•
Set up the access point with a non-PoE network connection on page 23
To set up your access point, follow the procedure in one of these sections.
Set up the access point with a PoE network connection
You can connect the access point to a Power over Ethernet plus (PoE+) switch in your
network. The switch must be connected to a network router that is connected to the
Internet. If you use a PoE+ connection, the access point does not require a power
adapter.
WiFi clients can connect to the access point and access your network and the Internet.
Figure 4. Set up the access point with a PoE+ connection to your network
User Manual22Install the Access Point in Your
Network and Access It for Initial
Configuration
Insight Managed Smart Cloud Wireless Access Point AC3000 WAC540 User Manual