User manual
Settings
50
The My Devices page displays.
4. Scroll down to the NETWORK section.
This section displays technical information about the Arlo Go camera’s cellular
network connection settings.
5. To view or change APN settings, tap or click APN Settings.
If the camera is oine, a QR code displays. Otherwise, the Edit APN page
displays.
Changing the APN might cause your camera to be unreachable to the network.
Do not change these settings unless instructed to do so by network support.
6. If a QR code displays, aim the camera at the QR code, and follow the onscreen
instructions.
7. To change the network mode from the Edit APN page, select Auto, LTE Only, or
HSPA/HSPA+ Only.
This setting is not available for all Arlo Go cameras.
Restart the Camera
¾ To restart the camera:
1. Tap the Arlo icon
on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Devices page displays.
2. Tap or click Settings.
The Settings page displays.
3. Tap or click My Devices.
A list of cameras displays.
4. Tap or click the camera.
The settings for the camera display.
5. Scroll down and tap or click Restart.
The camera restarts.