Owner's Manual

030-300613 Rev A 88 August 2009
User Guide VersaLink Wireless Gatewa
y
(
Model 7500
)
14.2.4.4 QOS
The following screen will appear if you select Advanced > Diagnostics > System Status Tables > QOS from the
main menu. This screen contains the Internet Protocol QoS Status.
NOTE: If your Gateway’s Ethernet VersaPort is configured for “WAN Uplink Port” instead of “LAN Ethernet
Port,” this feature will not be available. Refer to section 14.4.3, “VersaPort.”
Click close to return to the Version Data screen.
NOTE: QoS must be enabled for this table to be populated.
Qdisc Name Displays the QoS Discipline Name.
Qdisc Handle Displays the QoS Discipline Handle.
Interface Displays the QoS Discipline Interface.
Bytes Sent Displays the QoS Discipline Interface.
Packets Sent Displays the number of bytes sent.
Packets Dropped Displays the number of packets dropped.
Packets Over Limit Displays the number of packets over the committed limit.
close Click this button to exit out of the QoS screen.
reset Click this button to reset the QoS statistics information to 0.