Owner's Manual

030-300613 Rev A 87 August 2009
User Guide VersaLink Wireless Gatewa
y
(
Model 7500
)
Station Displays the order number in which the stations are first accessed by Gateway. The
history allows a maximum of 250 stations.
MAC Address Displays the Media Access Controller Address assigned to the station. This is a unique
number typed into the WLAN device’s permanent memory during production. A
station’s MAC address is typically printed on the card or can be viewed using the
card’s configuration utility.
State Displays the current state of the negotiation between the station and Gateway.
14.2.4.3 RIP Table
The following screen will appear if you select Advanced > Diagnostics > System Status Tables > RIP Table from
the main menu. The RIP Table allows you to monitor network routes received via the Routing Information Protocol
(RIP).
NOTE: RIP must be enabled for this table to be populated.
RIP Network Routing Table Displays network routes received via RIP.
RIP Host Routing Table Displays the host routes received via RIP.
Destination Displays the destination IP address of the route.
Netmask Displays the IP mask of the route.
Gateway Displays the gateway of the route.
Metric Displays the RIP metric (0-15). A lower value is better.