Manualshelf

Owner's Manual

ManualsBrandsNetgear ManualsModemsNetgear VersaLink7500
81828384858687888990
030-300613 Rev A 83 August 2009
User Guide VersaLink Wireless Gatewa
y
(
Model 7500
)
14.2.3.5 USB
The following screen will appear if you select Advanced > Diagnostics > Network Statistics > USB from the main
menu. This screen displays information about your Gateway’s USB connection.
Number of Resets Displays the number of times the Host PC reset the USB Interface.
Number of Isrs Displays the number of times the Host PC requested communication with the
Gateway.
In Unicast Packets Displays the number of packets received that did not have a Multicast or Broadcast
class destination IP address. “In” is from the host PC to the Gateway.
In Non-Unicast Packets Displays the number of packets received that had a Multicast or Broadcast class
destination IP address. “In” is from the host PC to the Gateway.
In Multicast Frames Displays the number of frames received that had a Multicast class destination IP
address. “In” is from the host PC to the Gateway.
In Broadcast Frames Displays the number of frames received that had a Broadcast class destination IP
address. “In” is from the host PC to the Gateway.
In Errors Displays the number of packets received with an invalid format. “In” is from the host
PC to the Gateway.
Out Good Frames Displays the number of frames sent to the Host PC. “Out” is from the Gateway to the
host PC.
Out Unicast Packets Displays the number of packets sent that did not have a Multicast or Broadcast class
destination IP address. “Out” is from the Gateway to the host PC.
Out Non-Unicast Packets Displays the number of packets sent that had a Multicast or Broadcast class
destination IP address. “Out” is from the Gateway to the host PC.
Out Multicast Frames Displays the number of frames sent that had a Multicast class destination IP address.
“Out” is from the Gateway to the host PC.
Out Broadcast Frames Displays the number of frames sent that had a Broadcast class destination IP address.
“Out” is from the Gateway to the host PC.
Out Errors Displays the number of packets received by the Gateway but not sent to PC due to an
Error condition. “Out” is from the Gateway to the host PC.