Owner's Manual

030-300613 Rev A 70 August 2009
User Guide VersaLink Wireless Gatewa
y
(
Model 7500
)
13.2.3.1 Apply Rule
The following screen will appear if you click the enable button from the Port Triggering screen (Security >
Services > Port Triggering > Apply Rule). This screen allows you to apply a rule previously selected from the
Triggering Rule drop-down menu.
Rule Name Displays the name for the new port triggering rule being created.
Outgoing Protocol Click this drop-down menu to select an outgoing connection from the local network
on a predetermined port or range of ports:
• Tcp: Transmission Control Protocol.
• Udp: User Datagram Protocol.
Port Start Displays the local LAN side TCP/UDP start port.
Port End Displays the local LAN side TCP/UDP end port.
Incoming Protocol Click this drop-down menu to select the incoming protocol for the triggered ports:
• Tcp: Transmission Control Protocol.
• Udp: User Datagram Protocol.
Port Start The WAN side TCP/UDP start port.
Port End The WAN side TCP/UDP end port.
apply Click this button to create a port triggering rule that can be enabled from the Port
Triggering screen’s Triggering Rule drop-down menu.
back Click this button to return to the Port Triggering screen.