Quick Reference Guide

System Logs and Error Messages
583
ProSecure Unified Threat Management (UTM) Appliance
System Log Messages
This section describes log messages that belong to one of the following categories:
• Logs that are generated by traffic that is meant for the UTM.
• Logs that are generated by traffic that is routed or forwarded through the UTM.
• Logs that are generated by system daemons: the NTP daemon, the WAN daemon, and
others daemons.
System Startup
This section describes log messages generated during system startup.
Reboot
This section describes log messages generated during a system reboot.
Service Logs
This section describes log messages generated during firmware updates and other
service-related events.
Table 150. System logs: system startup
Message Jan 1 15:22:28 [UTM] [ledTog] [SYSTEM START-UP] System Started
Explanation Logs that are generated when the system is started.
Recommended Action None.
Table 151. System logs: reboot
Message Nov 25 19:42:57 [UTM] [reboot] Rebooting in 3 seconds
Explanation Logs that are generated when the system is rebooted from the web management
interface.
Recommended Action None.
Table 152. System logs: service
Message 2008-12-31 23:59:48 error Firmware update failed! Either the subscription is not yet
registered, or has expired.
Explanation Logs that are generated when a firmware update fails or succeeds. The message
shows the date and time, and the event.
Note: The service log includes miscellaneous service messages.
Recommended Action None.