User's Manual

When using this device, a certain separation distance between antenna and nearby persons
has to be kept to ensure RF exposure compliance. In order to comply with the RF exposure
limits established in the ANSI C95.1 standards, the distance between the antennas and the
user should not be less than [20cm].
RF Exposure
The antenna(s) used for this transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Frequency Statement
This device is going to be operated in 5.15~5.25GHz,5.725~5.825GHz frequency range, it is
restricted in indoor environment only.
About this guide
This user guide contains the information your PEGATRON WIFI Module.
System requirements
Before installing the PEGATRON WIFI module, make sure that your system meets the
following requirements:
Intel® Pentium® 4 or AMD K7/K8 system
Minimum 64MB system memory
Windows® XP/VISTA operating system
Installing the device drivers
To install the device driver in your computer:
Insert the support CD to the optical drive and follow the following procedure.
Step 1