Installation Guide

PRO
Quick Start
Orbi Pro WiFi 6
Orbi Pro WiFi 6 Router
(Model SXR80)
Ethernet cable
Power adapter
(varies by region)
Package contents
Wall-mount coverWall-mount bracket
Note: The bracket and cover come preattached.
Screws
Wall anchors
Hardware overview
1
2 4
5
6
7
3
IMPORTANT: You can install the wall mount vertically on a wall only. Do not install the wall mount horizontally or on the
ceiling.
1 2
Prepare the wall mount
1 2 3 4
Wall-mount the Orbi Pro WiFi 6
Orbi Pro WiFi 6 Satellite
(Model SXS80)
Note: Included with the SXK80,
or purchased separately.
Orbi Pro WiFi 6 Router
Orbi Pro WiFi 6 Satellite
1
2 4 5
6
7
1
Bar LED
2
Sync button (also used for WPS connection)
3
WAN port with 2.5G/1G Ethernet. Use port 1 for
your WAN (Internet) connection.
4
1G LAN Ethernet ports 2–5. You can set up one
link aggregation group (LAG) on ports 2 and 3,
and another LAG on ports 4 and 5.
5
Power LED
6
Reset button
7
DC power connector
3
1
Bar LED
2
Sync button (also used for WPS connection)
3
2.5G/1G LAN Ethernet port 1. Use the port for a
high-speed LAN connection.
4
1G LAN Ethernet ports 2–5. You can set up one
link aggregation group (LAG) on ports 2 and 3,
and another LAG on ports 4 and 5.
5
Power LED
6
Reset button
7
DC power connector
When setup is complete, the WAN port on the Orbi Pro
WiFi 6 router is connected with an Ethernet cable to a
modem or gateway, and the router is connected to power.
Router setup
Note: Not included with the SXS80