User's Manual
Table Of Contents
- Contents
- 1. Overview
- Supported Orbi Pro WiFi 6 models
- Orbi Pro WiFi 6 router and satellite hardware overviews
- LED behavior
- Wall mount your Orbi Pro WiFi 6
- Orbi Pro WiFi 6 router label and Orbi Pro Wifi 6 satellite label
- Connect your Orbi Pro WiFi 6 router
- Place your Orbi Pro WiFi 6 satellite
- Sync your Orbi Pro WiFi 6 satellite
- Set up your Orbi network with the NETGEAR Insight app
- 2. Connect to the Orbi Pro WiFi 6 Network and Access the Router
- 3. Specify Your Internet Settings
- Use the Internet Setup Wizard
- Manually set up the Internet connection
- Manage an IPv6 Internet connection
- Requirements for entering IPv6 addresses
- Specify IPv6 Internet connections
- Use auto detection for an IPv6 Internet connection
- Use auto configuration for an IPv6 Internet connection
- Set up an IPv6 6rd tunnel Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 pass-through Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- 4. Control Access to the Internet
- Manage MAC access control lists for WiFi networks and the LAN
- Manage the Orbi network access control list
- Use keywords to block Internet sites
- Delete keywords that are used to block Internet sites
- Avoid blocking on a trusted computer
- Block services from the Internet
- Schedule when to block Internet sites and services
- Set up security event email notifications
- 5. Specify Network Settings
- View or change WAN settings
- Change the WAN port speed
- Manage Dynamic DNS
- Set up a default DMZ server
- Change the router’s device name
- Manage the LANs
- Use the router as a DHCP server
- Disable a DHCP server feature in the router
- Manage reserved LAN IP addresses
- Manage custom static routes
- Change the admin WiFi network settings
- Manage the employee WiFi network settings
- Manage the IoT WiFi network settings
- Set up a guest WiFi network and captive portal
- Manage the download bandwidth per SSID
- View or change advanced WiFi settings
- Use the router as a WiFi access point
- Set up router mode
- Generate a new backhaul password
- Enable or disable MU-MIMO
- Enable or disable fast roaming
- Enable or disable Protected Management Frames
- Check your Internet bandwidth
- Manage the VLANs
- Improve network connections with Universal Plug and Play
- 6. Manage Your Network
- Update the router and satellite firmware
- Change the admin password
- Enable admin password reset
- Reset the admin password
- View router status and usage information
- Display Internet port statistics
- Check the Internet connection status
- View satellites, WiFi devices, and wired devices connected to the Orbi network
- View satellite status
- View and manage logs of router activity
- Set up a syslog server
- Monitor Internet traffic
- Set Your Time Zone
- Change the NTP Server
- Manage the router configuration file
- Set up remote management
- Use remote access
- 7. Customize Internet Traffic Rules for Ports
- 8. Use VPN to Access Your Network
- 9. Troubleshooting
- A. Supplemental Information
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless > Wireless 2.
The WiFi settings for the wireless 2 network display on the page.
5. Under Security Options, select a WPA option:
•
WPA2-PSK [AES]. The WPA2 option uses the newest standard for the strongest
security, but some older computers and WiFi devices cannot use WPA2.
When you select this option, the Password (Network Key) field displays. Do the
following:
a.
In the Password (Network Key) field, enter the network key (password) that
you want to use.
It is a text string from 8 to 63 characters.
b.
Write down the new password and keep it in a secure place for future
reference.
•
WPA-PSK [TKIP] + WPA2-PSK [AES]. If your network includes old computers
and WiFi devices, select this radio button.
When you select this option, the Password (Network Key) field displays. Do the
following:
a.
In the Password (Network Key) field, enter the network key (password) that
you want to use.
It is a text string from 8 to 63 characters.
b.
Write down the new password and keep it in a secure place for future
reference.
•
WPA2 Enterprise. If your network is connected to a RADIUS server that can
provide authentication, select this radio button. WPA2 Enterprise can provide
the highest level of security. Before a WiFi client can connect to the Wireless 2
network, the WiFi client must be configured on the RADIUS server and
authenticated against the RADIUS server. The router functions as the authenticator
between the WiFi client and the RADIUS server, which provides the actual
authentication.
When you select this option, additional fields display so that you can specify the
RADIUS server. Do the following:
a.
In the IP address field, enter the IP address of the RADIUS server to which
the router must connect.
b.
In the Port field, enter the port number that the router must use to
communicate with the RADIUS server.
User Manual96Specify Network Settings
Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80