User manual

M-FE116NA-1 QCARD
Vista 100BASE-T Network Ports with Built-in LEDs
The front panel of the Model FE116 hub has sixteen vista 100BASE-T ports.
Two LEDs—the Link/Rx LED and the Part (partition) LED—are built into each
100BASE-T port.
Normal/Uplink Push Button
The Normal/Uplink push button on the Model FE116 hub allows you to select
Normal (MDI-X) or Uplink (MDI) wiring for port 16, eliminating the need to
use a crossover cable. Ports 1 to 15 on the hub are permanently configured for
Normal wiring.
Rear Panel
The rear panel of the Model FE116 hub has a DC power jack and a ground clip
(not used). The Model FE116 hub accepts 5 V DC.
8494FA
Link/Rx
LED
Part
LED
vista 100BASE-T
network port
5Vdc 3.0A
100 BASE-TX Class
– +
Rear Panel of the Model FE116 Hub
8495FA
Power
jack
Ground clip