User manual

Model EN104/EN108/EN116 Ethernet Hub Installation Guide
Verify that your package contains the following:
• Model EN104 hub, Model EN108 hub, or Model EN116 hub
• Mounting kit (for wall installation)
• BNC T-connector and BNC 50
Ω
terminator (only if you have purchased the Model EN108
hub or the Model EN116 hub)
• This installation guide
• Warranty & Owner Registration Card
• Support Information Card
• Power adapter and cord
Vista 10BASE-T Network Ports with Built-in LEDs
The front panel of the Model EN104 hub has four RJ-45 10BASE-T ports, the Model EN108 hub
has eight RJ-45 10BASE-T ports, and the Model EN116 hub has sixteen RJ-45 10BASE-T ports.
Two LEDs—the Link LED and the Rx LED—are built into each 10BASE-T port.
Product Illustration
8732FA
Front Panel of the Model EN104 hub
Front Panel of the Model EN108 hub
Front Panel of the Model EN116 hub
Pwr (Power)
Normal/Uplink
push button
Col (Collision)
Pwr
Col
EN104
10 BASE-T HUB
LINK Rx
1234 56 78
Pwr
Col
EN108
10 BASE-T HUB
LINK Rx
1234 56 78
Pwr
Col
EN116
10 BASE-T HUB
1234 56 78
LINK Rx
10BASE-T ports
8724EA
Link
LED
Rx
LED