Quick Reference Guide

152 | Chapter 5. Managing Users, Groups, and Authentication
ProSecure Web/Email Security Threat Management (STM) Appliance
2. In the Add New IP Subnets/Groups section of the screen, complete the fields as explained in
the following table:
3. Click the Add table button. The new group is added to the Groups Membership by IP
Address table.
To delete a group from the List of Groups table, click the Delete table button in the Action
column for the group that you want to delete.
Note: When you delete a group, an exception rule that might be
associated with this group no longer has any effect. You can delete
such an exception rule.
Configuring User Accounts
When you create a user account, you can assign the user to a local group. Therefore, you
should first create any local groups, then user accounts. User accounts are added to the
STM’s local user database.
Table 45. IP Subnet/Group Settings
Setting Description
IP Address An IP address on your local network or on a remote device to which the users are assigned.
Netmask The subnet mask to which the users are assigned. For an individual IP address, specify
255.255.255.255.
Name A descriptive (alphanumeric) name of the group for identification and management purposes.