Quick Reference Guide

Chapter 5. Managing Users, Groups, and Authentication | 171
ProSecure Web/Email Security Threat Management (STM) Appliance
To specify the global user configuration settings:
1. Select User Management > Configuration from the menu. The Configuration screen
displays:
Figure 98.
2. Locate the Sessions Parameters section on screen. Specify the session settings:
• Session Expiration Length. The period after which a session expires and a user
needs to log in again. This setting applies to all users. From the drop-down list, select
either Minutes or Hours. Then, in the field to the left of the drop-down list, enter a
number for the minutes or hours. The session expiration length cannot exceed the
idle time period.
Note: For information about how to set the time-out period for the Web
Management Interface, see Changing Administrative Passwords
and Timeouts on page 62.
• Idle Time. The period after which an idle connection is terminated and a user needs
to log in again. This setting applies to all users. From the drop-down list, select either
Minutes or Hours. Then, in the field to the left of the drop-down list, enter a number
for the minutes or hours. The idle time period cannot exceed the session expiration
length.
3. Click Apply to save the session settings.