Quick Reference Guide

168 | Chapter 5. Managing Users, Groups, and Authentication
ProSecure Web/Email Security Threat Management (STM) Appliance
3. Complete the fields and make your selections from the drop-down list as explained in the
following table:
4. Click Test to verify that the RADIUS server can actually function with the RADIUS settings
that you have specified. The automated test procedure checks the connection to the
RADIUS server, the user name, and the password. If any settings require changes, you are
notified at the end of the automated test procedure.
5. Click Apply to save your settings. The RADIUS domain and server are added to the List of
RADIUS table.
To delete a domain and server from the List of RADIUS table, click the Delete table button in
the Action column for the domain and server that you want to delete.
WARNING!
After their sessions have expired, users can no longer log in to the
STM if the domain that has been assigned to them is the domain
that you deleted.
Table 49. RADIUS Settings
Setting Description
Domain A descriptive (alphanumeric) name of the RADIUS authentication server for identification
and management purposes.
Server The server IP address or server host name of the RADIUS authentication server.
Port The port number for the RADIUS authentication server. The default port for the RADIUS
server is 1812.
Shared Secret The shared secret (password) that is required to access the RADIUS authentication
server.
Repeat The maximum number of times that the STM attempts to connect to the RADIUS server.
The default setting is 3 times.
Timeout The period after which an unsuccessful connection attempt times out. The default setting
is 5 seconds.
Authentication
Type
From the drop-down list, select the encryption type for the connection between the STM
and the LDAP or Active Directory server:
• PAP. The connection uses the Password Authentication Protocol (PAP). This is the
default setting.
• CHAP. The connection uses the Challenge Handshake Authentication Protocol
(CHAP).
Use the
following user
account to test
RADIUS
settings
Select this check box to test the RADIUS settings with the user name and password that
you need to specify.
User Name The user name to test the RADIUS settings with.
Password The password to test the RADIUS settings with.